Chinese
chinese
EnglishEnhancing Transformer Control Efficiency: A Comprehensive Guide
2024-10-05
language
中国
韩国
韩国
韩国
韩国
韩国
Guangzhou Yongxiang (Yongheng )Electrical Appliance Factory
Guangzhou Yongxiang (Yongheng )Electrical Appliance Factory
What are the reasons for the low insulation resistance of transformers?
- Categories:FAQ
- Author:
- Origin:
- Time of issue:2022-03-14
- Views:0
(Summary description)1) The coil is damp.
2) The thickness and number of layers of the insulating layer do not meet the requirements.
3) The coil margin distance and creepage distance do not meet the requirements.
4) The skeleton is cracked, allowing moisture to penetrate.
5) The coil is not dried when dipped, the insulating paint is not filmed, and the insulating resin is not cured.
6) The moisture in the coil is not removed before the coil is dipped. When the coil is dried after dipping, the insulating paint on the surface of the coil has been dried and cured, but the interior has not been cured to form a film.
What are the reasons for the low insulation resistance of transformers?
(Summary description)1) The coil is damp.
2) The thickness and number of layers of the insulating layer do not meet the requirements.
3) The coil margin distance and creepage distance do not meet the requirements.
4) The skeleton is cracked, allowing moisture to penetrate.
5) The coil is not dried when dipped, the insulating paint is not filmed, and the insulating resin is not cured.
6) The moisture in the coil is not removed before the coil is dipped. When the coil is dried after dipping, the insulating paint on the surface of the coil has been dried and cured, but the interior has not been cured to form a film.
- Categories:FAQ
- Author:
- Origin:
- Time of issue:2022-03-14
- Views:0
Information
1) The coil is damp.
2) The thickness and number of layers of the insulating layer do not meet the requirements.
3) The coil margin distance and creepage distance do not meet the requirements.
4) The skeleton is cracked, allowing moisture to penetrate.
5) The coil is not dried when dipped, the insulating paint is not filmed, and the insulating resin is not cured.
6) The moisture in the coil is not removed before the coil is dipped. When the coil is dried after dipping, the insulating paint on the surface of the coil has been dried and cured, but the interior has not been cured to form a film.
Scan the QR code to read on your phone
Relevant news
Leave A Message
首页留言
描述：
Copyright ©2022 Guangzhou Yongheng ( Yongxiang) Electrical Appliance Factory All rights reserved 粤ICP备10233228号 SEO
