language
中国
韩国
韩国
韩国
韩国
韩国
Scientific and technological innovation and new life
Specializing in the production of various El transformers, voltage rise and fall transformers, ring transformers, SG three-phase and DG single-phase dry-type transformers, regulated power supplies, special transformers
Your position:
Homepage
/
/
/
Toroidal transformer hissing noise when working, how to eliminate it?

Toroidal transformer hissing noise when working, how to eliminate it?

  • Categories:FAQ
  • Author:
  • Origin:
  • Time of issue:2022-03-14
  • Views:0

(Summary description)Transformer noise may be due to the following reasons:
1. The selected transformer model is wrong, and the rated voltage is lower than the actual voltage;
2. When the transformer is designed, the noise design is too large;
3. Transformer manufacturing process problems.
As for the early use of your transformer, there is no problem, is the voltage high in the recent period? Or the curing time of the transformer dip paint is not enough, and the iron core has a seam after a period of use.

Toroidal transformer hissing noise when working, how to eliminate it?

(Summary description)Transformer noise may be due to the following reasons:
1. The selected transformer model is wrong, and the rated voltage is lower than the actual voltage;
2. When the transformer is designed, the noise design is too large;
3. Transformer manufacturing process problems.
As for the early use of your transformer, there is no problem, is the voltage high in the recent period? Or the curing time of the transformer dip paint is not enough, and the iron core has a seam after a period of use.

  • Categories:FAQ
  • Author:
  • Origin:
  • Time of issue:2022-03-14
  • Views:0
Information

Transformer noise may be due to the following reasons:
1. The selected transformer model is wrong, and the rated voltage is lower than the actual voltage;
2. When the transformer is designed, the noise design is too large;
3. Transformer manufacturing process problems.
As for the early use of your transformer, there is no problem, is the voltage high in the recent period? Or the curing time of the transformer dip paint is not enough, and the iron core has a seam after a period of use.

Scan the QR code to read on your phone

Relevant news

Leave A Message

留言应用名称:
首页留言
描述:

Copyright ©2022  Guangzhou Yongheng ( Yongxiang) Electrical Appliance Factory  All rights reserved    粤ICP备10233228号  SEO